{"id":13344,"date":"2026-10-13T02:08:40","date_gmt":"2026-10-13T02:08:40","guid":{"rendered":"https:\/\/www.vacuum-sintering.com\/high-temperature-vacuum-furnace\/"},"modified":"2026-10-13T02:08:49","modified_gmt":"2026-10-13T02:08:49","slug":"horno-de-vacio-de-alta-temperatura","status":"publish","type":"post","link":"https:\/\/www.vacuum-sintering.com\/es\/high-temperature-vacuum-furnace\/","title":{"rendered":"Horno de vac\u00edo de alta temperatura: C\u00f3mo especificar una zona caliente de 1800 \u00b0C o 2300 \u00b0C."},"content":{"rendered":"

What is a high temperature vacuum furnace?<\/h2>\n

A horno de vac\u00edo de alta temperatura<\/strong> is a batch furnace that heats a workload to 1800 \u00b0C or above inside a water-cooled chamber held under high vacuum \u2014 typically 6.7\u00d710\u207b\u00b3 Pa when a diffusion or molecular pump is fitted \u2014 or under a low partial pressure of inert gas. It exists for one reason: to reach temperatures that oxidise, decarburise or contaminate a material in air, without ever letting oxygen near the part.<\/p>\n

The temperature number on a datasheet is the easy part. The engineering question is which zona caliente<\/strong> \u2014 graphite, tungsten or molybdenum \u2014 can deliver that number, in your atmosphere, for the number of cycles your production plan actually assumes.<\/p>\n

\"Hot<\/figure>\n

How a high temperature vacuum furnace works<\/h2>\n

A high temperature vacuum furnace is a system of four sub-systems that must be specified together. Choosing them independently is how projects end up with a furnace that cannot hold its rated temperature.<\/p>\n

Stage 1 \u2014 Pumping and vacuum level<\/h3>\n

The chamber is roughed down with a mechanical pump and then brought to high vacuum with a diffusion or molecular pump. In our V-series furnaces the graphite, tungsten and molybdenum hot zones are all rated to 6,7\u00d710\u207b\u00b3 Pa<\/strong> in this configuration. Vacuum level is a pump-set decision, not an inherent property of the furnace body: the same chamber ordered with mechanical pumping only reaches the rough-vacuum range (around 1 Pa) and is intended for duties that do not need high vacuum. If your process depends on oxide reduction or on degassing a powder compact, high vacuum is the specification; if it does not, paying for it is optional.<\/p>\n

Stage 2 \u2014 Heating and the hot zone<\/h3>\n

Heating elements and insulation define both the ceiling temperature and the atmosphere chemistry the furnace can tolerate. Graphite elements and graphite felt insulation are the workhorse for 2000\u20132400 \u00b0C service in vacuum and inert gas. Tungsten elements suit 1800\u20132000 \u00b0C where carbon contact is unacceptable, and molybdenum covers the 1000\u20131300 \u00b0C band economically.<\/p>\n

Stage 3 \u2014 Temperature measurement and control<\/h3>\n

Above roughly 1200 \u00b0C a standard thermocouple no longer gives a reliable reading, so high temperature vacuum furnaces switch to optical pyrometry for the upper range and use contact thermocouples only for the lower segment. We build this as a dual-sensor arrangement \u2014 a contact sensor for the ramp and a pyrometer for the soak \u2014 driven by an industrial computer with PLC and PID control. Temperature uniformity across the useful volume is the metric that matters for part quality: our V-series chambers are mapped at \u00b15 \u00b0C<\/strong> using a five-point survey calibrated at 1000 \u00b0C.<\/p>\n

Stage 4 \u2014 Cooling<\/h3>\n

After the soak the workload has to come down without re-oxidising. An optional 2 bar gas rapid-cooling<\/strong> package circulates inert gas through the hot zone; without it, cooling is by radiation and natural convection only, which can add hours to a cycle.<\/p>\n

Key parameters to specify<\/h2>\n\n\n\n\n\n\n\n\n\n\n\n
Par\u00e1metro<\/th>\nPor qu\u00e9 es importante<\/th>\nTypical values in our V-series<\/th>\n<\/tr>\n<\/thead>\n
Temperatura m\u00e1xima<\/td>\nSets the hot zone material, not just a number<\/td>\n2000 \/ 2400 \u00b0C (graphite); 1800 \/ 2000 \u00b0C (tungsten); 1000 \/ 1300 \u00b0C (molybdenum)<\/td>\n<\/tr>\n
Aspiradora definitiva<\/td>\nGoverns oxide reduction and degassing<\/td>\n6.7\u00d710\u207b\u00b3 Pa (diffusion\/molecular pump configuration)<\/td>\n<\/tr>\n
Ramp rate<\/td>\nControls grain growth and thermal shock<\/td>\n1\u201315 \u00b0C\/min below 1600 \u00b0C; 1\u201310 \u00b0C\/min above 1600 \u00b0C<\/td>\n<\/tr>\n
Uniformidad de la temperatura<\/td>\nDetermines yield across a load<\/td>\n\u00b15 \u00b0C (five-point survey, 1000 \u00b0C)<\/td>\n<\/tr>\n
Useful chamber size<\/td>\nSets batch weight and part envelope<\/td>\n300\u00d7300\u00d7400 mm up to 800\u00d7800\u00d71200 mm<\/td>\n<\/tr>\n
Enfriamiento<\/td>\nCycle time and surface finish<\/td>\nOptional 2 bar gas rapid cooling<\/td>\n<\/tr>\n
Control<\/td>\nReproducibility and traceability<\/td>\nIndustrial PC + PLC + PID, multi-zone control<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Two of these deserve emphasis. First, ramp rate is temperature-dependent, not a single figure<\/strong> \u2014 a furnace that ramps at 15 \u00b0C\/min in the lower range will typically be limited to 10 \u00b0C\/min once above 1600 \u00b0C, because radiation losses and element stress both climb. Second, uniformity is a specification you should demand evidence for<\/strong>. A \u00b15 \u00b0C claim is only meaningful next to the survey method and the temperature at which it was taken.<\/p>\n

Choosing the hot zone for 1800 \u00b0C vs 2300 \u00b0C<\/h2>\n

This is the decision that actually determines whether your furnace works. Graphite, tungsten and molybdenum are not interchangeable options on a price list; each carries an atmosphere limit and a contamination risk.<\/p>\n\n\n\n\n\n\n\n\n\n
Zona caliente<\/th>\nTemperatura m\u00e1xima<\/th>\nBest fit<\/th>\nWatch out for<\/th>\n<\/tr>\n<\/thead>\n
Grafito (GR)<\/strong><\/td>\n2000 \/ 2400 \u00b0C<\/td>\nHardmetals, carbon and graphite products, C\/C composites, ceramics that tolerate carbon<\/td>\nCarbon pick-up on carbon-sensitive alloys; not for oxidising atmospheres<\/td>\n<\/tr>\n
Tungsten (W)<\/strong><\/td>\n1800 \/ 2000 \u00b0C<\/td>\nRefractory metals, transparent and technical ceramics, carbon-free sintering<\/td>\nHigher cost; avoid oxidising and moisture-rich atmospheres<\/td>\n<\/tr>\n
Molybdenum (MO)<\/strong><\/td>\n1000 \/ 1300 \u00b0C<\/td>\nNon-ferrous metals, stainless and titanium alloys, high-speed steel, hydrogen-sensitive work<\/td>\nLower ceiling; not the choice when 1800 \u00b0C+ is the target<\/td>\n<\/tr>\n
Induction graphite (CO)<\/strong><\/td>\n2000 \/ 2400 \u00b0C<\/td>\nLarge-section graphite and carbon parts needing fast cycles<\/td>\n5 Pa vacuum configuration; induction field considerations<\/td>\n<\/tr>\n
Continuous graphite (CGR)<\/strong><\/td>\n2000 \u00b0C<\/td>\nVolume production of uniform parts<\/td>\n10 Pa vacuum configuration; suited to line production, not one-off runs<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

The practical rule: if you need 2300 \u00b0C, you need a graphite hot zone. If you need 1800 \u00b0C and the material cannot touch carbon, you need tungsten.<\/strong> Molybdenum is the economical answer only when the process ceiling sits at or below 1300 \u00b0C.<\/p>\n

Available high temperature vacuum furnace models<\/h2>\n

Our V-series covers the 1800\u20132400 \u00b0C band with matched chamber sizes, so the hot zone and the useful volume can be selected independently.<\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Modelo<\/th>\nZona caliente<\/th>\nC\u00e1mara (mm)<\/th>\nAspiradora definitiva<\/th>\nTemperatura m\u00e1xima<\/th>\n<\/tr>\n<\/thead>\n
V3GR24<\/td>\nGrafito (GR)<\/td>\n300\u00d7300\u00d7400<\/td>\n6,7\u00d710\u207b\u00b3 Pa<\/td>\n2000 \/ 2400 \u00b0C<\/td>\n<\/tr>\n
V4GR24<\/td>\nGrafito (GR)<\/td>\n400\u00d7400\u00d7600<\/td>\n6,7\u00d710\u207b\u00b3 Pa<\/td>\n2000 \/ 2400 \u00b0C<\/td>\n<\/tr>\n
V6GR24<\/td>\nGrafito (GR)<\/td>\n600\u00d7600\u00d7900<\/td>\n6,7\u00d710\u207b\u00b3 Pa<\/td>\n2000 \/ 2400 \u00b0C<\/td>\n<\/tr>\n
V7GR24<\/td>\nGrafito (GR)<\/td>\n700\u00d7700\u00d71000<\/td>\n6,7\u00d710\u207b\u00b3 Pa<\/td>\n2000 \/ 2400 \u00b0C<\/td>\n<\/tr>\n
V8GR24<\/td>\nGrafito (GR)<\/td>\n800\u00d7800\u00d71200<\/td>\n6,7\u00d710\u207b\u00b3 Pa<\/td>\n2000 \/ 2400 \u00b0C<\/td>\n<\/tr>\n
V3W20<\/td>\nTungsten (W)<\/td>\n300\u00d7300\u00d7400<\/td>\n6,7\u00d710\u207b\u00b3 Pa<\/td>\n1800 \/ 2000 \u00b0C<\/td>\n<\/tr>\n
V4W20<\/td>\nTungsten (W)<\/td>\n400\u00d7400\u00d7600<\/td>\n6,7\u00d710\u207b\u00b3 Pa<\/td>\n1800 \/ 2000 \u00b0C<\/td>\n<\/tr>\n
V5W20<\/td>\nTungsten (W)<\/td>\n500\u00d7500\u00d7700<\/td>\n6,7\u00d710\u207b\u00b3 Pa<\/td>\n1800 \/ 2000 \u00b0C<\/td>\n<\/tr>\n
V6W20<\/td>\nTungsten (W)<\/td>\n600\u00d7600\u00d7900<\/td>\n6,7\u00d710\u207b\u00b3 Pa<\/td>\n1800 \/ 2000 \u00b0C<\/td>\n<\/tr>\n
V4M013<\/td>\nMolybdenum (MO)<\/td>\n400\u00d7400\u00d7600<\/td>\n6,7\u00d710\u207b\u00b3 Pa<\/td>\n1000 \/ 1300 \u00b0C<\/td>\n<\/tr>\n
V8M013<\/td>\nMolybdenum (MO)<\/td>\n800\u00d7800\u00d71200<\/td>\n6,7\u00d710\u207b\u00b3 Pa<\/td>\n1000 \/ 1300 \u00b0C<\/td>\n<\/tr>\n
V6CO24<\/td>\nInduction graphite<\/td>\n600\u00d7600\u00d7900<\/td>\n5 Pa<\/td>\n2000 \/ 2400 \u00b0C<\/td>\n<\/tr>\n
V6CGR20<\/td>\nContinuous graphite<\/td>\n600\u00d7600\u00d7900<\/td>\n10 Pa<\/td>\n2000 \u00b0C<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

All V-series furnaces share the same control platform, five-point \u00b15 \u00b0C uniformity mapping, multi-zone temperature control and the optional 2 bar rapid-cooling package. See the full vacuum sintering furnace range<\/a> for chamber details and loading configurations.<\/p>\n

High temperature vacuum furnace vs alternative processes<\/h2>\n

Temperature alone rarely decides the process. Pressure, atmosphere and cycle shape usually matter just as much.<\/p>\n\n\n\n\n\n\n\n\n\n\n
Proceso<\/th>\nTemperature capability<\/th>\nPressure \/ atmosphere<\/th>\nEl\u00edgelo cuando<\/th>\n<\/tr>\n<\/thead>\n
High temperature vacuum furnace<\/strong><\/td>\n1800\u20132400 \u00b0C<\/td>\nVacuum (6.7\u00d710\u207b\u00b3 Pa) or partial pressure<\/td>\nYou need the highest temperature with no carbon or oxygen contamination<\/td>\n<\/tr>\n
Prensado en caliente al vac\u00edo<\/strong><\/td>\n2200 \u00b0C<\/td>\nUniaxial pressure, 100\u20131200 t<\/td>\nYou need densification, not just heating \u2014 pressure closes porosity<\/td>\n<\/tr>\n
Spark plasma sintering (SPS)<\/strong><\/td>\n2200 \u00b0C<\/td>\nUniaxial, very fast ramps (up to 300 \u00b0C\/min)<\/td>\nYou need to suppress grain growth in a laboratory or pilot scale<\/td>\n<\/tr>\n
Gas pressure sintering (GPS)<\/strong><\/td>\n1600 \/ 2000 \u00b0C<\/td>\n6 \/ 10 MPa inert gas<\/td>\nYou need isostatic-like densification of ceramics without a pressure head<\/td>\n<\/tr>\n
Diffusion bonding furnace<\/strong><\/td>\n1400 \u00b0C<\/td>\nVacuum, mechanical pressure<\/td>\nYou are joining parts and 1400 \u00b0C is sufficient<\/td>\n<\/tr>\n
Horno de hidr\u00f3geno al vac\u00edo<\/strong><\/td>\n1000 \/ 1300 \u00b0C<\/td>\nVacuum + hydrogen<\/td>\nYou need oxide reduction in a reducing atmosphere<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

For densification with pressure at ultra-high temperature, our P-series graphite vacuum hot pressing furnace<\/a> reaches 2200 \u00b0C with 100\u20131200 t of uniaxial force. For volume production of small, uniform parts, a continuous multi-station platform<\/a> may beat a batch furnace on cost per part.<\/p>\n

Aplicaciones<\/h2>\n
    \n
  • Hardmetals and cemented carbide<\/strong> \u2014 sintering and post-sintering heat treatment on graphite hot zones.<\/li>\n
  • Transparent and technical ceramics<\/strong> \u2014 Al\u2082O\u2083, ZrO\u2082, Si\u2083N\u2084, SiC where a carbon-free tungsten hot zone protects optical and electrical properties.<\/li>\n
  • Refractory metals<\/strong> \u2014 tungsten, molybdenum and their alloys, sintered or annealed in the hot zone that can hold the temperature.<\/li>\n
  • Carbon and graphite products<\/strong> \u2014 electrodes, C\/C brake discs and plates, graphite felt, thermally conductive film.<\/li>\n
  • Powder metallurgy and MIM<\/strong> \u2014 debinding plus vacuum sintering with optional hydrogen pre-treatment.<\/li>\n
  • Materiales aeroespaciales y semiconductores<\/strong> \u2014 high-melting-point and high-purity work that tolerates neither oxygen nor carbon.<\/li>\n<\/ul>\n

    Limitations \u2014 when not to choose a high temperature vacuum furnace<\/h2>\n

    A 2400 \u00b0C furnace is the wrong purchase more often than buyers expect. Be honest about these cases:<\/p>\n

      \n
    • You do not actually need 1800 \u00b0C.<\/strong> If the process tops out at 1300 \u00b0C, a molybdenum hot zone or a dedicated vacuum hydrogen furnace costs less to buy and less to run.<\/li>\n
    • You need pressure, not just temperature.<\/strong> Vacuum alone cannot close residual porosity in many ceramics; that is a hot pressing or GPS job.<\/li>\n
    • Your material cannot see carbon.<\/strong> Above 1800 \u00b0C the practical hot zone is graphite unless you move to tungsten, and tungsten raises the cost of both the furnace and the elements.<\/li>\n
    • You need fast cycle times on small parts.<\/strong> Batch vacuum cycles include pump-down and controlled cooling; a continuous platform will generally win on throughput.<\/li>\n
    • Your atmosphere must be reducing, not vacuum.<\/strong> Hydrogen-related reduction and brazing belong in a hydrogen furnace, not a high vacuum chamber.<\/li>\n
    • You cannot support the utilities.<\/strong> High vacuum needs diffusion or molecular pumping, and 2400 \u00b0C imposes real power and water-cooling loads on the building.<\/li>\n<\/ul>\n

      Preguntas frecuentes<\/h2>\n

      What is the difference between 1800 \u00b0C and 2300 \u00b0C in practice?<\/h3>\n

      It is a hot zone material decision, not a set-point. Above 2000 \u00b0C the graphite hot zone is the standard route; 1800 \u00b0C can also be reached with a tungsten hot zone, which avoids carbon contact but costs more.<\/p>\n

      What vacuum level does a high temperature vacuum furnace need?<\/h3>\n

      High vacuum \u2014 6.7\u00d710\u207b\u00b3 Pa with a diffusion or molecular pump \u2014 is the configuration we supply for V-series furnaces. Lower-cost mechanical pumping only reaches the rough-vacuum range and is intended for duties that do not require high vacuum.<\/p>\n

      How fast can a high temperature vacuum furnace heat up?<\/h3>\n

      Typically 1\u201315 \u00b0C\/min below 1600 \u00b0C and 1\u201310 \u00b0C\/min above 1600 \u00b0C. Induction-heated graphite furnaces in the same series allow faster ramps, up to 60 \u00b0C\/min in the lower range.<\/p>\n

      What temperature uniformity should I expect?<\/h3>\n

      We map \u00b15 \u00b0C across the useful volume using a five-point survey calibrated at 1000 \u00b0C. Ask any supplier for the survey method and the reference temperature behind their uniformity claim.<\/p>\n

      Can a high temperature vacuum furnace run with a partial pressure of inert gas?<\/h3>\n

      Yes. Partial-pressure operation is common when a fully evacuated chamber would volatilise an element of the charge; it is a standard control option rather than a separate furnace design.<\/p>\n

      When should I choose hot pressing or gas pressure sintering instead?<\/h3>\n

      When the goal is densification rather than heat treatment. Uniaxial hot pressing reaches 2200 \u00b0C with 100\u20131200 t of force, and gas pressure sintering applies 6\/10 MPa of inert gas for near-isostatic densification of ceramics.<\/p>","protected":false},"excerpt":{"rendered":"

      What is a high temperature vacuum furnace? A high temperature vacuum furnace is a batch […]<\/p>\n","protected":false},"author":2,"featured_media":6699,"comment_status":"closed","ping_status":"","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"_uag_custom_page_level_css":"","site-sidebar-layout":"default","site-content-layout":"","ast-site-content-layout":"default","site-content-style":"default","site-sidebar-style":"default","ast-global-header-display":"","ast-banner-title-visibility":"","ast-main-header-display":"","ast-hfb-above-header-display":"","ast-hfb-below-header-display":"","ast-hfb-mobile-header-display":"","site-post-title":"","ast-breadcrumbs-content":"","ast-featured-img":"","footer-sml-layout":"","ast-disable-related-posts":"","theme-transparent-header-meta":"","adv-header-id-meta":"","stick-header-meta":"","header-above-stick-meta":"","header-main-stick-meta":"","header-below-stick-meta":"","astra-migrate-meta-layouts":"default","ast-page-background-enabled":"default","ast-page-background-meta":{"desktop":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"ast-content-background-meta":{"desktop":{"background-color":"var(--ast-global-color-4)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"var(--ast-global-color-4)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"var(--ast-global-color-4)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"rank_math_rich_snippet":"","rank_math_schema_Article":[],"rank_math_schema_Product":[],"rank_math_schema_WebPage":[],"footnotes":""},"categories":[37],"tags":[],"class_list":["post-13344","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-technical-insight"],"acf":[],"spectra_custom_meta":{"_uagb_previous_block_counts":["a:90:{s:21:\"uagb\/advanced-heading\";i:0;s:15:\"uagb\/blockquote\";i:0;s:12:\"uagb\/buttons\";i:0;s:18:\"uagb\/buttons-child\";i:0;s:19:\"uagb\/call-to-action\";i:0;s:15:\"uagb\/cf7-styler\";i:0;s:11:\"uagb\/column\";i:0;s:12:\"uagb\/columns\";i:0;s:14:\"uagb\/container\";i:0;s:21:\"uagb\/content-timeline\";i:0;s:27:\"uagb\/content-timeline-child\";i:0;s:14:\"uagb\/countdown\";i:0;s:12:\"uagb\/counter\";i:0;s:8:\"uagb\/faq\";i:0;s:14:\"uagb\/faq-child\";i:0;s:10:\"uagb\/forms\";i:0;s:17:\"uagb\/forms-accept\";i:0;s:19:\"uagb\/forms-checkbox\";i:0;s:15:\"uagb\/forms-date\";i:0;s:16:\"uagb\/forms-email\";i:0;s:17:\"uagb\/forms-hidden\";i:0;s:15:\"uagb\/forms-name\";i:0;s:16:\"uagb\/forms-phone\";i:0;s:16:\"uagb\/forms-radio\";i:0;s:17:\"uagb\/forms-select\";i:0;s:19:\"uagb\/forms-textarea\";i:0;s:17:\"uagb\/forms-toggle\";i:0;s:14:\"uagb\/forms-url\";i:0;s:14:\"uagb\/gf-styler\";i:0;s:15:\"uagb\/google-map\";i:0;s:11:\"uagb\/how-to\";i:0;s:16:\"uagb\/how-to-step\";i:0;s:9:\"uagb\/icon\";i:0;s:14:\"uagb\/icon-list\";i:0;s:20:\"uagb\/icon-list-child\";i:0;s:10:\"uagb\/image\";i:0;s:18:\"uagb\/image-gallery\";i:0;s:13:\"uagb\/info-box\";i:0;s:18:\"uagb\/inline-notice\";i:0;s:11:\"uagb\/lottie\";i:0;s:21:\"uagb\/marketing-button\";i:0;s:10:\"uagb\/modal\";i:0;s:18:\"uagb\/popup-builder\";i:0;s:16:\"uagb\/post-button\";i:0;s:18:\"uagb\/post-carousel\";i:0;s:17:\"uagb\/post-excerpt\";i:0;s:14:\"uagb\/post-grid\";i:0;s:15:\"uagb\/post-image\";i:0;s:17:\"uagb\/post-masonry\";i:0;s:14:\"uagb\/post-meta\";i:0;s:18:\"uagb\/post-taxonomy\";i:0;s:18:\"uagb\/post-timeline\";i:0;s:15:\"uagb\/post-title\";i:0;s:20:\"uagb\/restaurant-menu\";i:0;s:26:\"uagb\/restaurant-menu-child\";i:0;s:11:\"uagb\/review\";i:0;s:12:\"uagb\/section\";i:0;s:14:\"uagb\/separator\";i:0;s:11:\"uagb\/slider\";i:0;s:17:\"uagb\/slider-child\";i:0;s:17:\"uagb\/social-share\";i:0;s:23:\"uagb\/social-share-child\";i:0;s:16:\"uagb\/star-rating\";i:0;s:23:\"uagb\/sure-cart-checkout\";i:0;s:22:\"uagb\/sure-cart-product\";i:0;s:15:\"uagb\/sure-forms\";i:0;s:22:\"uagb\/table-of-contents\";i:0;s:9:\"uagb\/tabs\";i:0;s:15:\"uagb\/tabs-child\";i:0;s:18:\"uagb\/taxonomy-list\";i:0;s:9:\"uagb\/team\";i:0;s:16:\"uagb\/testimonial\";i:0;s:14:\"uagb\/wp-search\";i:0;s:19:\"uagb\/instagram-feed\";i:0;s:10:\"uagb\/login\";i:0;s:17:\"uagb\/loop-builder\";i:0;s:18:\"uagb\/loop-category\";i:0;s:20:\"uagb\/loop-pagination\";i:0;s:15:\"uagb\/loop-reset\";i:0;s:16:\"uagb\/loop-search\";i:0;s:14:\"uagb\/loop-sort\";i:0;s:17:\"uagb\/loop-wrapper\";i:0;s:13:\"uagb\/register\";i:0;s:19:\"uagb\/register-email\";i:0;s:24:\"uagb\/register-first-name\";i:0;s:23:\"uagb\/register-last-name\";i:0;s:22:\"uagb\/register-password\";i:0;s:30:\"uagb\/register-reenter-password\";i:0;s:19:\"uagb\/register-terms\";i:0;s:22:\"uagb\/register-username\";i:0;}"],"rank_math_internal_links_processed":["1"],"_botwriter_seo_score":["61"],"_botwriter_seo_report":["a:11:{s:5:\"score\";i:61;s:5:\"grade\";s:4:\"fair\";s:9:\"seo_title\";s:69:\"High Temperature Vacuum Furnace (1800 \u00b0C \/ 2300 \u00b0C) Selection Guide\";s:10:\"word_count\";i:1695;s:8:\"meta_len\";i:139;s:9:\"title_len\";i:67;s:15:\"primary_keyword\";s:0:\"\";s:5:\"stats\";a:16:{s:2:\"h1\";i:0;s:2:\"h2\";i:9;s:2:\"h3\";i:10;s:2:\"h4\";i:0;s:14:\"links_internal\";i:3;s:14:\"links_external\";i:0;s:6:\"images\";i:2;s:18:\"images_missing_alt\";i:0;s:10:\"paragraphs\";i:21;s:18:\"has_featured_image\";i:1;s:9:\"faq_count\";i:0;s:11:\"faq_visible\";i:0;s:8:\"faq_mode\";s:4:\"none\";s:17:\"embedding_indexed\";i:0;s:15:\"embedding_model\";s:0:\"\";s:20:\"embedding_updated_at\";i:0;}s:6:\"checks\";a:17:{i:0;a:5:{s:2:\"id\";s:9:\"title_len\";s:5:\"label\";s:30:\"SEO title length 30\u201365 chars\";s:6:\"weight\";i:8;s:6:\"passed\";b:0;s:4:\"hint\";s:8:\"67 chars\";}i:1;a:5:{s:2:\"id\";s:13:\"title_keyword\";s:5:\"label\";s:24:\"Primary keyword in title\";s:6:\"weight\";i:8;s:6:\"passed\";b:0;s:4:\"hint\";s:14:\"No keyword set\";}i:2;a:5:{s:2:\"id\";s:12:\"meta_present\";s:5:\"label\";s:24:\"Meta description present\";s:6:\"weight\";i:6;s:6:\"passed\";b:1;s:4:\"hint\";s:0:\"\";}i:3;a:5:{s:2:\"id\";s:11:\"meta_length\";s:5:\"label\";s:31:\"Meta description 80\u2013160 chars\";s:6:\"weight\";i:6;s:6:\"passed\";b:1;s:4:\"hint\";s:9:\"139 chars\";}i:4;a:5:{s:2:\"id\";s:12:\"meta_keyword\";s:5:\"label\";s:35:\"Primary keyword in meta description\";s:6:\"weight\";i:6;s:6:\"passed\";b:0;s:4:\"hint\";s:0:\"\";}i:5;a:5:{s:2:\"id\";s:10:\"word_count\";s:5:\"label\";s:18:\"Word count \u2265 300\";s:6:\"weight\";i:8;s:6:\"passed\";b:1;s:4:\"hint\";s:10:\"1695 words\";}i:6;a:5:{s:2:\"id\";s:18:\"first_para_keyword\";s:5:\"label\";s:34:\"Primary keyword in first paragraph\";s:6:\"weight\";i:6;s:6:\"passed\";b:0;s:4:\"hint\";s:0:\"\";}i:7;a:5:{s:2:\"id\";s:10:\"h2_present\";s:5:\"label\";s:15:\"At least one H2\";s:6:\"weight\";i:6;s:6:\"passed\";b:1;s:4:\"hint\";s:4:\"h2=9\";}i:8;a:5:{s:2:\"id\";s:16:\"no_h1_in_content\";s:5:\"label\";s:24:\"No H1 inside the content\";s:6:\"weight\";i:4;s:6:\"passed\";b:1;s:4:\"hint\";s:4:\"h1=0\";}i:9;a:5:{s:2:\"id\";s:18:\"headings_hierarchy\";s:5:\"label\";s:23:\"Sub-headings used (H3+)\";s:6:\"weight\";i:4;s:6:\"passed\";b:1;s:4:\"hint\";s:0:\"\";}i:10;a:5:{s:2:\"id\";s:14:\"internal_links\";s:5:\"label\";s:26:\"At least one internal link\";s:6:\"weight\";i:8;s:6:\"passed\";b:1;s:4:\"hint\";s:10:\"3 internal\";}i:11;a:5:{s:2:\"id\";s:14:\"external_links\";s:5:\"label\";s:31:\"At least one external reference\";s:6:\"weight\";i:4;s:6:\"passed\";b:0;s:4:\"hint\";s:0:\"\";}i:12;a:5:{s:2:\"id\";s:11:\"faq_present\";s:5:\"label\";s:24:\"FAQ enrichment available\";s:6:\"weight\";i:0;s:6:\"passed\";b:0;s:4:\"hint\";s:16:\"No FAQ generated\";}i:13;a:5:{s:2:\"id\";s:14:\"images_present\";s:5:\"label\";s:22:\"Has at least one image\";s:6:\"weight\";i:4;s:6:\"passed\";b:1;s:4:\"hint\";s:0:\"\";}i:14;a:5:{s:2:\"id\";s:10:\"images_alt\";s:5:\"label\";s:24:\"All images have alt text\";s:6:\"weight\";i:6;s:6:\"passed\";b:1;s:4:\"hint\";s:13:\"0 missing alt\";}i:15;a:5:{s:2:\"id\";s:11:\"slug_length\";s:5:\"label\";s:17:\"Slug 3\u201360 chars\";s:6:\"weight\";i:4;s:6:\"passed\";b:1;s:4:\"hint\";s:8:\"31 chars\";}i:16;a:5:{s:2:\"id\";s:12:\"slug_keyword\";s:5:\"label\";s:23:\"Primary keyword in slug\";s:6:\"weight\";i:4;s:6:\"passed\";b:0;s:4:\"hint\";s:0:\"\";}}s:4:\"hash\";s:40:\"62e8ff1c61cfaf20c62ff634a4614e589b7ccbca\";s:11:\"computed_at\";i:1791857330;}"],"_botwriter_seo_analyzed_at":["1791857330"],"_botwriter_seo_readability_score":["43"],"_botwriter_seo_readability_report":["a:9:{s:5:\"score\";i:43;s:5:\"grade\";s:4:\"poor\";s:6:\"flesch\";d:24.5;s:10:\"word_count\";i:1695;s:9:\"sentences\";i:62;s:10:\"paragraphs\";i:21;s:6:\"checks\";a:9:{i:0;a:6:{s:2:\"id\";s:6:\"flesch\";s:5:\"label\";s:19:\"Flesch reading ease\";s:6:\"weight\";i:10;s:6:\"status\";s:3:\"bad\";s:5:\"value\";s:8:\"24.5\/100\";s:4:\"hint\";s:53:\"Aim for 60+ (plain English). Lower is harder to read.\";}i:1;a:6:{s:2:\"id\";s:16:\"avg_sentence_len\";s:5:\"label\";s:23:\"Average sentence length\";s:6:\"weight\";i:8;s:6:\"status\";s:3:\"bad\";s:5:\"value\";s:10:\"27.3 words\";s:4:\"hint\";s:35:\"Keep most sentences under 20 words.\";}i:2;a:6:{s:2:\"id\";s:14:\"long_sentences\";s:5:\"label\";s:26:\"Long sentences (>20 words)\";s:6:\"weight\";i:6;s:6:\"status\";s:3:\"bad\";s:5:\"value\";s:3:\"47%\";s:4:\"hint\";s:27:\"Try to keep this under 25%.\";}i:3;a:6:{s:2:\"id\";s:15:\"long_paragraphs\";s:5:\"label\";s:28:\"Long paragraphs (>150 words)\";s:6:\"weight\";i:6;s:6:\"status\";s:4:\"good\";s:5:\"value\";s:2:\"0%\";s:4:\"hint\";s:42:\"Break long paragraphs into shorter blocks.\";}i:4;a:6:{s:2:\"id\";s:23:\"subheading_distribution\";s:5:\"label\";s:23:\"Subheading distribution\";s:6:\"weight\";i:8;s:6:\"status\";s:4:\"good\";s:5:\"value\";s:9:\"179 words\";s:4:\"hint\";s:47:\"Add an H2\/H3 every ~300 words to ease scanning.\";}i:5;a:6:{s:2:\"id\";s:16:\"transition_words\";s:5:\"label\";s:22:\"Transition words ratio\";s:6:\"weight\";i:6;s:6:\"status\";s:3:\"bad\";s:5:\"value\";s:2:\"2%\";s:4:\"hint\";s:45:\"Use transitions in at least 30% of sentences.\";}i:6;a:6:{s:2:\"id\";s:13:\"passive_voice\";s:5:\"label\";s:13:\"Passive voice\";s:6:\"weight\";i:6;s:6:\"status\";s:4:\"warn\";s:5:\"value\";s:3:\"16%\";s:4:\"hint\";s:44:\"Prefer active voice; keep passive under 10%.\";}i:7;a:6:{s:2:\"id\";s:20:\"consecutive_starters\";s:5:\"label\";s:29:\"Consecutive sentence starters\";s:6:\"weight\";i:4;s:6:\"status\";s:4:\"good\";s:5:\"value\";s:10:\"2 in a row\";s:4:\"hint\";s:25:\"Vary how sentences start.\";}i:8;a:6:{s:2:\"id\";s:10:\"word_count\";s:5:\"label\";s:10:\"Word count\";s:6:\"weight\";i:4;s:6:\"status\";s:4:\"good\";s:5:\"value\";s:10:\"1695 words\";s:4:\"hint\";s:48:\"Aim for at least 600 words for in-depth content.\";}}s:4:\"hash\";s:40:\"d180ef391c6d6d76833a885e54bdcd5f40d6f97a\";s:11:\"computed_at\";i:1791857330;}"],"_botwriter_seo_readability_at":["1791857330"],"_thumbnail_id":["6699"],"rank_math_title":["High Temperature Vacuum Furnace (1800 \u00b0C \/ 2300 \u00b0C) Selection Guide"],"rank_math_description":["How to specify a high temperature vacuum furnace at 1800 \u00b0C or 2300 \u00b0C: hot zone material, vacuum level, ramp rate, uniformity and cooling."],"rank_math_focus_keyword":["high temperature vacuum furnace"],"_elementor_page_assets":["a:0:{}"],"_uag_css_file_name":["uag-css-13344.css"],"_uag_page_assets":["a:9:{s:3:\"css\";s:0:\"\";s:2:\"js\";s:0:\"\";s:18:\"current_block_list\";a:7:{i:0;s:11:\"core\/search\";i:1;s:10:\"core\/group\";i:2;s:12:\"core\/heading\";i:3;s:17:\"core\/latest-posts\";i:4;s:20:\"core\/latest-comments\";i:5;s:13:\"core\/archives\";i:6;s:15:\"core\/categories\";}s:8:\"uag_flag\";b:0;s:11:\"uag_version\";s:10:\"1791868734\";s:6:\"gfonts\";a:0:{}s:10:\"gfonts_url\";s:0:\"\";s:12:\"gfonts_files\";a:0:{}s:14:\"uag_faq_layout\";b:0;}"]},"uagb_featured_image_src":{"full":["https:\/\/www.vacuum-sintering.com\/wp-content\/uploads\/2026\/06\/1800c-high-temperature-vacuum-furnace.webp",1200,799,false],"thumbnail":["https:\/\/www.vacuum-sintering.com\/wp-content\/uploads\/2026\/06\/1800c-high-temperature-vacuum-furnace-150x150.webp",150,150,true],"medium":["https:\/\/www.vacuum-sintering.com\/wp-content\/uploads\/2026\/06\/1800c-high-temperature-vacuum-furnace-721x480.webp",721,480,true],"medium_large":["https:\/\/www.vacuum-sintering.com\/wp-content\/uploads\/2026\/06\/1800c-high-temperature-vacuum-furnace-768x511.webp",768,511,true],"large":["https:\/\/www.vacuum-sintering.com\/wp-content\/uploads\/2026\/06\/1800c-high-temperature-vacuum-furnace-1024x682.webp",1024,682,true],"1536x1536":["https:\/\/www.vacuum-sintering.com\/wp-content\/uploads\/2026\/06\/1800c-high-temperature-vacuum-furnace.webp",1200,799,false],"2048x2048":["https:\/\/www.vacuum-sintering.com\/wp-content\/uploads\/2026\/06\/1800c-high-temperature-vacuum-furnace.webp",1200,799,false],"trp-custom-language-flag":["https:\/\/www.vacuum-sintering.com\/wp-content\/uploads\/2026\/06\/1800c-high-temperature-vacuum-furnace-18x12.webp",18,12,true],"woocommerce_thumbnail":["https:\/\/www.vacuum-sintering.com\/wp-content\/uploads\/2026\/06\/1800c-high-temperature-vacuum-furnace-600x375.webp",600,375,true],"woocommerce_single":["https:\/\/www.vacuum-sintering.com\/wp-content\/uploads\/2026\/06\/1800c-high-temperature-vacuum-furnace-600x400.webp",600,400,true],"woocommerce_gallery_thumbnail":["https:\/\/www.vacuum-sintering.com\/wp-content\/uploads\/2026\/06\/1800c-high-temperature-vacuum-furnace-100x100.webp",100,100,true]},"uagb_author_info":{"display_name":"JUN XU","author_link":"https:\/\/www.vacuum-sintering.com\/es\/author\/openclaw\/"},"uagb_comment_info":0,"uagb_excerpt":"What is a high temperature vacuum furnace? A high temperature vacuum furnace is a batch […]","_links":{"self":[{"href":"https:\/\/www.vacuum-sintering.com\/es\/wp-json\/wp\/v2\/posts\/13344","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.vacuum-sintering.com\/es\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.vacuum-sintering.com\/es\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.vacuum-sintering.com\/es\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/www.vacuum-sintering.com\/es\/wp-json\/wp\/v2\/comments?post=13344"}],"version-history":[{"count":0,"href":"https:\/\/www.vacuum-sintering.com\/es\/wp-json\/wp\/v2\/posts\/13344\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.vacuum-sintering.com\/es\/wp-json\/wp\/v2\/media\/6699"}],"wp:attachment":[{"href":"https:\/\/www.vacuum-sintering.com\/es\/wp-json\/wp\/v2\/media?parent=13344"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.vacuum-sintering.com\/es\/wp-json\/wp\/v2\/categories?post=13344"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.vacuum-sintering.com\/es\/wp-json\/wp\/v2\/tags?post=13344"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}